All sides behind ...
The presentation shows the overbust-Corset "Pearl". It is designed for half cups and the used material is black vinyl (PVC), so called 'Lack'.
The Corset is worn in combination with a mini-skirt and thigh-length black boots. The skirt is embroidered with 'Paillettes',
The corset with its half cups, just covering the bust-nipples, is made with a lacing-pleat at the back.
An additional feature is an integrated and hand-drafted inner lining made of silken fabrics.
The eye-catching area is at the right and left side of the corset. These are created by accentuated sewing-lines and by little flaps underneath the waist-line to accentuate the hips, that creates the impression of a much smaller waist.
© Copyright Sabine Zieseniss
Between the shadows ...
The picture presents an underbust-corset named 'Topas', made of white jacquard-woven silk, combined with a black 'paillettes'-body and a 'chiffon'-skirt.
This corset is designed in a certain way for less tightness at the lower rips and the bust, but allows an extremely waist-reduction
Integrated triangular gussets at both sides of the hips create as well an excellent hip-shaping for voluptuous ladies as pronounced sexy feminine hips by an improved waistline/hip-ratio.
© Copyright Sabine Zieseniss
It's a kind of magic ... '
Here you see the corset 'Tiffany', made from leather in a snakeskin looking surface and with integrated cups, front-closure busk and an additional front-planchette.
The snakeskin looking surface is made by stamping and by printing with golden ornaments, which creates the expected metallic shimmering effect.
© Copyright Sabine Zieseniss
Additional features of this corset are an integrated hand-drafted inner lining made of silken fabrics and a lacing-pleat or lacing -protector at the back.
© Copyright of Photos: Alexander Walz (Kassel) / Sabine Zieseniss
Dangerous minds ...
This corset is designed and manufactured of black lamb-skin. The integrated cups are covered with genuine snakeskin leather. The front lacing closure of this corset is an uncommon eye-catcher, alternatively to the traditional front fastener with a stiff front-busk. The "real" lacing of the corset is designed in the traditional way for the rear.
© Copyright Sabine Zieseniss
Additional features :
Into this corset an hand-drafted inner lining, made of silken fabrics, plus a lacing-pleat at the back has been integrated
Differing from the demonstrated tie-up lacing closure, traditional fronts busk with hooks-and-eyes and a front-'planchette' is also possible. No doubt, the lacing-pleat is also replaceable by a common lace protector.
'Noblesse oblige'
The picture at right hand side presents the overbust-corset 'Jade', made of green silken jacquard.
The corset is provided with a traditional front-busk fastener and a front-planchette. To improve the optical fascination by an accentuated body-form, the corset is wedge-shaped between waist and lower edge. This corset is remarkable longer than other models. However, it differs additionally from the corset model 'Amber' as part of the design-series "Historical Corsets."
To increase the comfort of wear ability the corset can be equipped with an additional inner silken lining.
© Copyright Sabine Zieseniss
In combination with a black 'Etui'-evening-dress, this corset is always 'en vogue', or with other words: top fashionable to be presented in the society
Sabine Zieseniss
The Ardent Collection
1958
Born in Wuppertal
1977-1981
Engineer Studies at the University Niederrhein of Mönchengladbach with the main focus on Fashion-design, which covers essentially fashion-design and -construction, but also industrial convertiblenes- ses as well as industrial size standardisations.
1981
Conclusion as: Dipl.Ing. (Master)
1982-1990
industrial activities
since 1993
Structuring the Label 'The Ardent Collection' and first steps in Corset-Design.
2008
Representative Master Chief of guild
2010-2014
Master Chief of guild